Series A High Power 50 Taper with Dual Anchored Core Chilled Ball Screws and Linear Cross Roller Guides Built for and Proven in Titanium, a material that demands Box Ways from our competitors.
OKK HMX Series
Specifications
HM-X8000
| Item | Unit | Specification |
| Travel on X axis | mm | 1300(51.18′) |
| Travel on Y axis | mm | 1100 (43.31′) |
| Travel on Z axis | mm | 1550(61.02′) |
| Travel on A axis | deg | 40 to －110 |
| Travel on B axis | deg | 360 |
| Table (Pallet) work surface area | mm | 800 (31.50′) |
| Mass of maximum load loadable on table (Pallet) | kg | 2000 (4409lbs) (Uniformly distributed load) |
| Size of maximum load loadable on table (Pallet) | mm | 1200 (47.24″) X1250 (49.21″) |
| Spindle rotating speed | min-1 | 35 to 12000 (35 to 12000rpm) |
| Spindle motor (25%ED/30-min rating/continuous rating) | kW | 45/30/26 (60/40/35HP) |
| Spindle torque(25%ED/30-min rating/continuous rating) N*m | 623/382/305 (460/282/225 ft*lbs) | |
| Spindle taper hole | 7/24 taper, No. 50 | |
|
Rapid traverse rate |
m/min min-1 |
X/Y/Z:48(1889.76ipm) A:8.3(8.3rpm) BM6.6(l6.6rpm) |
| Number of storable tools | tools | 60 |
| Maximum tool diameter | mm | 115(4.53″) (270(10.63″) with no tools in adjoining pots) |
| Maximum tool length | mm | 400(15.75′) |
| Maximum tool mass | kg | 25(55lbs) |
| Tool exchange time (tool-to-tool) | sec | 2.8 |
| Tool exchange time (cut-to-cut) | sec | 5.7 |
| Required floor space | mm | 5433 (213.90′) X7355 (289.57′) |
| Machine height | mm | 4530(178.35′) |
| Machine mass | kg | 30000(66138lbs) |
HM-X8000
| Item | Unit | Characteristic |
| Axis movement X | мм | 1300(51.18′) |
| Axis movement Y | мм | 1100 (43.31′) |
| Axis movement Z | мм | 1550(61.02′) |
| Axis movement A | degrees | 40 to －110 |
| Axis movement B | degrees | 360 |
| Work area and floor area (pallet) | мм | 800 (31.50′) |
| mass Max. loadand, loadingand mine on the Table (pallet) |
Kg | 2000 (4409 lbs) (Equal distribution and Land load) |
| Size р Max. loadand, loadingand mine on the Table (pallet) |
мм | 1200 (47.24″) X 1250 (49.21″) |
| Spindle speed and I Spindle | min-1 | 35 to 12000 (35 to 12000 rpm) |
| Spindle motor (25% ED/30 min. Rating / permenant rating) | kV | 45/30/26 (60/40/35 Lс.) |
| Spindle (25% ED/30-min. Rating / permenant rating) N * m | 623/382/305 (460/282/225 ft * lb) | |
| conenaxis otand pstand and Spindle | 7/24 cone, No. 50 | |
| Fast travel speed move | м/min min-1 |
X/Y/Z:48(1889.76 ipm) A:8.3(8.3rpm) BM6.6(l6.6 rpm) |
| Capacity For Tool Storage | toolы | 60 |
| Maxand small dand амand тр tool | мм | 115(4.53″) (270(10.63″) Band of tools in large areas) |
| Maxand small dLand на tool | мм | 400(15.75′) |
| Maxand small mass tool | Kg | 25 (55 lbs) |
| Time assigned tool (tool to tool) | sec. | 2.8 |
| Time for me tool (cut to cut) | sec. | 5.7 |
| Trand buand may square | мм | 5433 (213.90′) X7355 (289.57′) |
| Device height | мм | 4530 (178.35′) |
| Weight Device | Kg | 30000 (66138 lbs) |
×